Extensive research and development combined
with huge investment in manufacturing technology has resulted in the most
advanced wet floor former available. The Tuff Form 2 available from PROCare
represents superb quality, strength and best value.
Manufactured to aircraft quality standards from solid GRP to
give exceptional strength with no risk of delamination and debonding.
Now with a flat underside, installation
time in wood floors is dramatically reduced.
Slippage or float during installation
is eliminated - the ribbed design of the underside allows the former
to key into soft cement screed whilst levelling the former.
Solid GRP construction allows Tuff Form
2 to be trimmed to length or fitted around awkward shapes (such
as boxed in pipe work or stacks) without losing any structural integrity.
Superb strength - tested to withstand
the high loads typically created by a 30 stone (190kg) wheelchair
user with carer in attendance.
Pre-formed fixing holes around the perimeter
allow the installer to select the most suitable fixing holes for
the installation. A thin web section at the base of each hole allows
the unused holes to be easily filled without the filler escaping
to the underside of the former.
Suitable for both gravity and pumped
waste
installations wastes and pump kits available from PROCare.
Large selection of screen options -
see main brochure
Full range of sizes available ex stock
- see reverse side.
All PROCare images are copyright to PROCare Shower and Bathrooms Centre SITE MAP